Outside the Lab: Pushing Porcelain to New Possibilities by Sherrie Eng, Associate Editor • Lab Management Today Magazine
As a former jewelry maker and sculptor, Chuck Little, CDT, constantly found himself asking what else he could do with the dental materials he works with every day—how far could he push it?
Little, owner of Little Dental Lab in Durango, Colorado—a crown and bridge lab that he and his wife, Terri, have been running for 21 years—decided to create tiny fairy figurines out of the porcelain powder and alloys he has in his lab. “The original idea for creating these porcelain fairies came from the constant reference to the tooth fairy when I tried to explain the responsibilities of a dental technician,” he says. “Our work is very important to patients and I take it very seriously. The fairies are a fun complement to that work.”
Little’s first fairy was a reproduction of his own logo. While he initially made the fairies small enough to fit on top of a quarter, he decided to make them larger—approximately two- to three-inches tall—so he could concentrate on adding greater detail. Using the lost wax technique, each one-of-a-kind piece is constructed from thin-gauge wax wire and then cast out of high noble porcelain alloy. The body and wings are opaqued and stacked with standard porcelain that he modifies to achieve the color he desires and then fired in his porcelain oven.
It takes Little close to 20 hours of hands-on work to complete one fairy, not including conception or design. “The wings are the hardest part and can take up to 10 hours alone to create. Casting the wings is very intricate and it’s tricky to make the fairies fit in the muffle,” he says. He also has to figure out how to adjust the firing times so he doesn’t over fire them. His meticulousness has paid off, however: to date, Little has never had to throw away a figurine and start over.
What began as a hobby and cathartic exercise has turned into a business: Little is now taking orders for his fairy figurines because of the
interest they’ve generated with the help of an article in a local newspaper and word of mouth. The fairies range in price from $1,800-$2,500 each and customers get some input about the design, like picking the color of the hair and wings. For more information, call 970-259-3787, e-mail firstname.lastname@example.org or visit www.littledentallab.com .
The Tooth Fairy Comes to Life By Louisa Drouet • Printed in the Arts Perspective, Winter 2009/2010
For most every child, losing their first tooth is quite exciting and unforgettable — the anticipation of what it will feel like, what it will look like, whether their tooth grow back, and whether the mystical tooth fairy will find her way underneath their fluffy pillow, take their little treasure, and leave a shiny gift in exchange. As adults we know this story is not quite completely true, yet we are also aware of the magical fantasy it plays in a child’s mind, giving a sense of ease to what might otherwise be a bit scary, or for some, even traumatic.
The irony in this is that later in life many will experience losing their teeth again, due to factors other than youthful development. Then our legendary tooth fairy will not appear with anything fun, such as a lustrous coin, but with a dental bill. That is when we ask, “Does she really exist?” One local certified dental technician (CDT) would say, “Of course, just a bit in reverse.”
Chuck Little, owner of Little Dental Lab, has been in business as a certified dental technician in the Four Corners region for more than 21 years. Over the decades, he has worked with a variety of local dentists, and if you have been in the area for any amount of time, there is a strong possibility you are strolling around with a smile developed from his artistic engineering.
“After being in the industry for more than 30 years, I’ve designed thousands of crowns and bridges for my dental clients,” said Little. “Funny thing is, I used to find it challenging to explain to people what I do for a living. Therefore, I decided to develop a little hobby outside of my daily work that has become an incredible passion for me and trademark of my dental lab.”
Nearly a decade ago, Little took his dental artistry to the next level and started creating actual tooth fairies — miniature, delicate, one-of-a-kind porcelain figurines that are less than three inches high.
“The original idea for creating these porcelain fairies came from the constant reference to the tooth fairy when I tried to explain the responsibilities of a dental technician,” said Little. “Our work is very important for the health and aesthetics of people that we are constructing dental crowns and bridges for, and I take that responsibility very seriously — the tooth fairies are a fun compliment to what I do.”
Each one of Little’s tooth fairies are made from thin-gauge wax wire and then cast out of precious metal using the lost-wax technique developed centuries ago; Little said the wings alone can take 10 to 12 hours to construct. Once the cast is complete, the frame is sandblasted and the metal finished down, after which the process of bringing the fairy to life begins. That is accomplished by using modified dental-porcelain powders that are delicately applied by hand with a small #6 brush. The figure is then placed into a porcelain oven and fired. Sculptures must be able to fit within the small furnace chamber and conform to the strict confines of the materials, which is very similar to the engineering and construction of the crowns and bridges that Little creates for actual human beings.
“I really enjoy the whole process of making these tiny tooth fairies,” said Little. “For most people, it would make them crazy, but I’m in my element when working on the minute detail of them. It’s probably why I love my profession so much — it fits my personality, and I know I’m helping people.”
Having worked with some of the most respected dental technicians in the world, spending years in the business and using the mystical story to describe his talents, we might just say Chuck Little is indeed the tooth fairy himself — he just happens to give your teeth back to you.
“There is nothing more important to me than making sure I’m designing high-quality, safe and pleasing crowns and bridges for my customers,” said Little. “And since everything is made here, locally, with American Dental Association-approved products and materials, my clients can be confident that their work will be completed quickly, accurately, safely and with a little bit of magic.”
FOR IMMEDIATE RELEASE: October, 2009
Long Time Local Dental Technician Celebrates More Than 21 Years In Business By Unveiling Unique Artistic and Engineering Talents!
Durango, Colo., October, 2009 – Chuck Little, Certified Dental Technician (CDT) and one of the most experienced CDT in the Four Corners region, is proud to announce not only being in business for more than 21 years but also his creation of artistic tooth fairies—small one-of-a-kind porcelain figurines constructed from thin gauge wax wire and then cast out of precious metal using the lost wax technique. Mr. Little said each piece takes special steps to construct by hand—the same as building specialized crowns and bridges for his dental customers.
“The original idea for creating these porcelain fairies came from the constant reference to the tooth fairy when I tried to explain the responsibilities of a dental technician,” said Mr. Little. “Our work is very important for the health and aesthetics of people that we are constructing dental crowns for and I take it very seriously. The tooth fairies are a fun compliment to that work.”
The body and wings of the fairies are built using specially modified dental porcelain powders. The figure is then placed into a porcelain oven and fired. The sculptures must fit within the small porcelain furnace chamber and conform to the strict confines of the materials, very similar to the construction and engineering of the crowns and bridges that Mr. Little creates.
“There is nothing more important to me than making sure I’m constructing high-quality, safe and pleasing crowns and bridges, for my customers,” said Mr. Little. “And since everything is made here, locally, with American Dental Association (ADA) approved products and materials, my clients can be confident that their work will be completed quickly, accurately and safely.”
Chuck Little has over 30 years of experience as a dental technician, with 23 of those years as a Certified Dental Technician. He has studied with some of the most respected technicians in the world including; Geller, Sang, Culp, Yoshida, Sieber and Aiba.